Contact Us
Address: Xingtai Industrial Park, Changtai County, Zhangzhou, Fujian, China
Home > Knowledge > Content
The maintenance method of the solid wood wardrobe
Dec 25, 2017

The solid wood wardrobe maintenance and cleaning can not only allow the solid wood wardrobe to keep the beautiful appearance forever, but also increase and prolong the life of the solid wood wardrobe. In general, the maintenance of the solid wood closet is mainly from the cleaning of the surface of the wardrobe, the prevention of the scraping and the inspection of the connection parts.

1, keep the cabinet door clean, and there can be no sundries and dust in the track. When cleaning, a semi wet cloth can be used to wipe the cabinet and door, and avoid the use of corrosive cleaning agent. The dust of the track can be cleaned by a vacuum cleaner or a small brush, and the metal parts, such as the cabinet, the pull rod and so on, are wiped with dry cloth.

2, should prevent the heavy objects and sharps from hitting the track, scratching the cabinet and the door, and the side of the cabinet can not touch the water and other liquid solvents, so as to prevent the edge from falling off.

3, to let it breathable, or regularly use dehumidifier, so as to avoid the body, clothing and damp raw bacteria. Use less aromatic compounds with chemical ingredients to remove the wardrobe, because they are likely to cause damage to the clothes.

4, wooden wardrobe as long as usual with a clean cloth to wipe, if there is dirt, you can use soap or detergent suitable is neutral, with a damp cloth.

5, light rail door pulley used for a long time, the noise is a normal phenomenon. In order to ensure that the pulley is smooth and smooth, please add lubricating oil regularly along the upper and lower pulley every 2-3 months.

6, when the room air or weather is too wet, please regularly open doors and windows ventilation, and put small packets of dry lime or other desiccator in the corner of the wardrobe, so as to prevent mold and door plank from being mouldy and deformed.

7, do not place the wardrobe in the place of direct sunlight, so as to prevent the wood from deforming or brittle under light.

8, long time sliding door, dust may be a slight drop gum phenomenon, you can use double-sided adhesive; track position locator cracks, with a slotted screwdriver to push side plate alignment positioner to dense joints can; sliding door tilt phenomenon, right tilt adjustable left bottom round of "loose" the sign at the right or bottom wheel "tight" sign.

9, when using a push door, we must first see if the hand is protruding, if there is a protruding, it should be flat first, otherwise the side cabinet or the pull hand will be damaged.

Previous: No Information

Next: The purchase of solid wood wardrobe